- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
04-16-2014 02:10 AM
Hello
Today I observed that when I try to logon to my PA200 I got error "Connecting to Management Server failed", when I try to logon by SSH "System initializing; please wait...."
After few minuts a was able to logon by browser and putty.
In system logs :
PA200 wasn't much loaded, after this self-acting restart there was some high load:
Restart on 04/04 was because I upgraded from 5.0.9 to 5.0.11.
Should I worry about it?
Regards
Slawek
04-17-2014 12:22 PM
no no, upgrade I did on 4.04.2014, unexpected restart was on 16.04.2104.
04-17-2014 12:26 PM
Hello Slv,
Could you please check "System" logs during that time to get detailed information about this incident.
Thanks
HULK
04-17-2014 12:39 PM
Hello Hulk
There is nothing special:
Could You tell me how to get it from CLI?
How to get system log from ie. 16.04.2014 8:00 +/-10minuts?
Regards
Slawek
04-17-2014 12:48 PM
Here is the CLI command for the same:
admin@40-PA-4020> show log system start-time equal 2006/08/01@10:00:00 end-time equal
<value> Datetime YYYY/MM/DD@hh:mm:ss (e.g. 2006/08/01@10:00:00)
admin@40-PA-4020> show log system start-time equal 2006/08/01@10:00:00 end-time equal
Thanks
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!