05-11-2015 02:48 AM
Hello
I would like to know if a setting like auto cost reference bandwith for ospf exist on the palo alto. as you can found in cisco.
if yes how could I implemented it
thank's
05-11-2015 04:32 PM
I'm not familiar with the Cisco implementation. But I think you are referring to configuration of administrative distance to create preferences for links. You can verify how these are seen by the Palo Alto with the commands in this tech note.
Verifying Equal Cost Paths in OSPF
General OSPF setup instructions
05-12-2015 07:18 AM
Gregoux
auto cost reference is used in Cisco to manage the cost of ospf links, as you know Cisco has default cost value for each interface based on its speed (1000/100/10) or if it is 10/100 Gig, this option is not available in PAN, in PAN whenever you add an interface to OSPF area, the default metric is set to 10.
Hopefully that helped
Amjad
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
