Mgmt interface stop working

Showing results for 
Show  only  | Search instead for 
Did you mean: 

Mgmt interface stop working

L1 Bithead



I have a PA-500 and after a storm, the management interface stopped work. When I connect a network cable the leds doesn't work.

I made a configuration to access the Firewall and to use some services throught another interface, but the "Log Scheduled Export" doesn't have this option.

How can I solv this problem?


Then it seems some hardware issue with port.

Did you try to reboot the device ?


Yes, I tried.


Can I use another interface to use the resource "Scheduled Log Export"?

Under device setup



service route config 


Then click on customize there you can choose feature which you want like email then choose the data port


I've already did this, I changed all features to source int 1/1.1 and gateway address, but the "Scheduled Log Export" doesn't work.

which feature you have selected ?

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!