Multiple subinterfaces with same VLAN tag

cancel
Showing results for 
Search instead for 
Did you mean: 

Multiple subinterfaces with same VLAN tag

L1 Bithead

Will the Palo Alto support using the same VLAN tag on multiple L3 subinterfaces?

4 REPLIES 4

L3 Networker

no. this is an invalid configuration and will fail to commit (the commit process does some checking for invalid configuration settings, marks this as invalid and gives a configuration error).

e.g.

  • Logical interface ethernet1/7.2 configured with tag value 2000. No two logical intefaces can have same tag value.
  • Logical interface ethernet1/7.5 configured with tag value 2000. No two logical intefaces can have same tag value.
  • Configuration is invalid

You example is of the same tag on multiple subinterfaces on the same physical interface.   Would this work if the VLAN tag were on subinterfaces on different physical interfaces?

IE

1/5.2 and 1/6.2  etc.   Assigning address of each on same subnet?

Yes, you can assign the same vlan tag to different interfaces like you are showing.  But if these interfaces are assigned to the same virtual router, they can not have ip addresses in the same range.  Or, if the ip addreses are in the same range, these interfaces need to be assigned to different virtual routers.

Excellent.  I will try this out.

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!