Enhanced Security Measures in Place: To ensure a safer experience, we’ve implemented additional, temporary security measures for all users.
11-11-2015 05:11 PM
The scenario is 3 firewalls, with PA-HO acting as the hub and PA-1 and PA-2 as the branch sites. The Branch sites connect to the head office network via ipsec tunnels to PA-HO and vice-versa.
Due to multple dis-contigous subnets on the branches, it was decided to use 0.0.0.0/0 proxy-ids for the tunnels. This was proven to work for the PA-HO and PA-1 tunnel (both local and remote networks set to 0.0.0.0/0).
Would it be possible to set the proxy-id for tunnel between PA-HO and PA-2 as 0.0.0.0/0 as well.
Many thanks in advance for your comments/feedback.
11-11-2015 05:15 PM
If vpn is between Palo firewalls then Proxy id is not needed.
If you leave it blank then it will use 0.0.0.0/0 by default.
You can create proxy id's if you do vpn with other vendors who use it.
Palo uses routing table to send traffic into vpn tunnel not proxy id.
11-11-2015 05:15 PM
If vpn is between Palo firewalls then Proxy id is not needed.
If you leave it blank then it will use 0.0.0.0/0 by default.
You can create proxy id's if you do vpn with other vendors who use it.
Palo uses routing table to send traffic into vpn tunnel not proxy id.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
