NAT before IPSEC

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

NAT before IPSEC

L0 Member

Hi folks,

 

We have a vendor requiring a public IP for the encrypted traffic.  Their guidance is based on Cisco configurations using "NAT before IPSEC" configurations.  Can anyone share/link a guide for this configuration on Palo?  Currently on PAN-OS 9.0 should it matter.

 

Thank you.

 

1 REPLY 1

Cyber Elite
Cyber Elite

Hi @Andrew_Bergt ,

 

NAT before IPsec is configured just like regular NAT except one of your interfaces will be your tunnel.  The tricky part is that you need to add static routes to get NAT to work -> https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000ClipCAC.

 

Thanks,

 

Tom

Help the community: Like helpful comments and mark solutions.
  • 1485 Views
  • 1 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!