02-07-2017 09:04 PM
I am applying destination nat. Natting public ip(untrust zone) to internal ip(trust zone). Public ip subnet is /28.
When access public ip in the monitoring logs it shows me dst zone as Untrust whenit should show dst zone as Trust.
I have policy in place and natting but its not hitting any policy and goes to expicit deny.
02-07-2017 11:21 PM
Did you apply the appropriate security policies and NAT policies in place for destination NAT?
Generally there are 2 places to check in your configurations:
Destination zone : Pre-NAT IP
Destination address : Pre-NAT IP
Destination Translation : Post-NAT IP
Destination zone : Post-NAT
Destination address : Pre-NAT
Source zone : Pre-NAT
I attached an illustration of diagram below for your reference. Hope it clarifies your understanding of destination NAT
02-08-2017 01:03 AM
@jneo very good explanation. I am also always sharing this video:
02-08-2017 05:53 AM - edited 02-08-2017 05:55 AM
I also like @RafisGaripov PAN videos
Here is part 2 of the above nat video 🙂
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!