10-25-2023 04:00 AM
Does anyone know if NEC Yealink IP phones will work behind a PA-440 with ALG disabled?
Thank you
GW
10-25-2023 10:59 AM
Just to be clear, you're using a NEC phone system that utilized Yealink phones right? That's how I'm interpreting your question.
Either way this will be fine as long as you can configure the NAT statements and security policy correctly. You'll likely want to disable ALG, but it also isn't a requirement in all situations. Since there's multiple different ways that this may actually be configured and how your trunk is configured on the NEC, this is somewhat harder to provide any configuration guidance on.
10-25-2023 10:59 AM
Just to be clear, you're using a NEC phone system that utilized Yealink phones right? That's how I'm interpreting your question.
Either way this will be fine as long as you can configure the NAT statements and security policy correctly. You'll likely want to disable ALG, but it also isn't a requirement in all situations. Since there's multiple different ways that this may actually be configured and how your trunk is configured on the NEC, this is somewhat harder to provide any configuration guidance on.
10-25-2023 01:18 PM
Yes. NEC phone system that utilized Yealink phones
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
