04-08-2021 10:22 AM
We are observing https port 443 open in private wildfire WF-500.
Please, share the command to disable the same.
Also in Wildfire services, we have found only SNMP, ICMP and SSH.
Https service is not available, so as to disable it.
04-08-2021 11:34 AM - edited 04-08-2021 11:37 AM
The Wildfire appliance uses 443 to comunicate with the firewalls:
https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000CljHCAS
Also it has API interface that can be used to manage it by using HTTPS but if you have not generated API key then this shouldn't mean anything that port 443 is open:
As I know of there is still no GUI web interface for the Wildfire appliance but port 443 is open because it is needed.
04-08-2021 11:34 AM - edited 04-08-2021 11:37 AM
The Wildfire appliance uses 443 to comunicate with the firewalls:
https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000CljHCAS
Also it has API interface that can be used to manage it by using HTTPS but if you have not generated API key then this shouldn't mean anything that port 443 is open:
As I know of there is still no GUI web interface for the Wildfire appliance but port 443 is open because it is needed.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
