12-15-2016 12:43 AM
I have created a miner with prototype ransomwaretracker.RW_IPBL., and processor and outputs.
Miner shows 11497 indicators but processor and outpus shows 0 indicators.
It cloned the model with default.
I have attached a pdf with setup.
I would appreciate help.
Thank you.
12-15-2016 02:33 AM
ransomwaretracker.RW_IPBL should be connected to an aggregator based on stdlib.aggregatorIPv4Outbound or stdlib.aggregatorIPv4Generic because the indicators generated have direction set to outbound (they are C2). The inbound aggregator collects only indicators with direction set to inbound or with no direction attribute at all.
You can check this by clicking on one of the indicators in the LOGS view. You will see a DROP generated by the indbound aggregator.
12-15-2016 02:33 AM
ransomwaretracker.RW_IPBL should be connected to an aggregator based on stdlib.aggregatorIPv4Outbound or stdlib.aggregatorIPv4Generic because the indicators generated have direction set to outbound (they are C2). The inbound aggregator collects only indicators with direction set to inbound or with no direction attribute at all.
You can check this by clicking on one of the indicators in the LOGS view. You will see a DROP generated by the indbound aggregator.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
