PA-220 internet issue

[netipwiz]

Hi, 

I bought recently a PA-220 for home as I am very new on Palo alto in order to learn.

My current setup is the following :

ISP router -------> PA-220 -------> Netgear router 

I've set the zones, virtual router etc, policy. 

I am following that article https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000ClFkCAK

For some reason I can't get the PAN to the internet.

My question is, my ISP router is on DHCP, should I set the in1/1 (untrusted zone) on DHCP and then the int1/2 on static?

Not sure either if PA-220 needs to be on DHCP.

Thanks,

[Major2375]

Hi,

you can configure the interface of your PA on your DHCP server to have a static-entry.

i think it is recommanded that your PA ip address with your setup will have a static ip address, since you cant have its ip address change for some reason.

hoope this helps.