PA-500 Upgrade to 4.0.3

cancel
Showing results for 
Search instead for 
Did you mean: 

PA-500 Upgrade to 4.0.3

L0 Member

Hi All,

I have just upgraded a PA-500 from 3.1.8 to 4.0.3 loading the 4.0.1 base first.

Once the unit rebooted the "Autocom" job has been stuck at 10% for the last 30 minutes and is still running.

Has anyone experienced this before, not sure if I should kill the job and recommit ?

Marc

1 ACCEPTED SOLUTION

Accepted Solutions

Hi Marct

the autocommit after upgrading from3.1 to 4.0 will take a fairly long time and can take up to 1 hour in some rarer cases

what actually happens is that the config file gets migrated and the log index needs to be recompiled into a newer format introduced in 4.0, if the unit has been running for a long time, the log index is pretty big so this operation can take a while

regards

Tom

Tom Piens
PANgurus

View solution in original post

4 REPLIES 4

L0 Member

Autocom just finished:

Results:


Enqueued                     ID             Type    Status Result Completed
--------------------------------------------------------------------------
2011/06/22 11:29:02           1          AutoCom       FIN     OK 12:08:35
Warnings:device: L3 Service Configuration is changed. l3svc will be restarted.

Details:device: Signature DFA installed successfully


Configuration committed successfully
Successfully committed last configuration

Hi Marct

the autocommit after upgrading from3.1 to 4.0 will take a fairly long time and can take up to 1 hour in some rarer cases

what actually happens is that the config file gets migrated and the log index needs to be recompiled into a newer format introduced in 4.0, if the unit has been running for a long time, the log index is pretty big so this operation can take a while

regards

Tom

Tom Piens
PANgurus

View solution in original post

Thanks

Marc

L4 Transporter

It was suggested I allow around an hour when we do upgrade from 3.1.x.  Apparently you don't have to go to 4.0.1 first though.  You do need it downloaded as it's the base image, but you can install 4.0.3 (or whatever is the latest) and upgrade directly to that.

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!