PA 5050 to N5K 10G Conn

[jithuraj]

Hi Guys,

I am facing an issue, links are not coming up b/w the PA and the N5K and both are 10G Ports. In PA, we should keep the link speed as auto and in N5K, there is no option to set the 10G port link status to Auto,

Have anybody faced this issue? 

Logs:

PA:

Name: ethernet1/22, ID: 37
Link status:
Runtime link speed/duplex/state: unknown/unknown/down
Configured link speed/duplex/state: auto/auto/auto
MAC address:
Port MAC address 00:1b:17:00:3f:25
Operation mode: layer3
Untagged sub-interface support: no

Thanks in Advance.

J

[Gun-Slinger]

What is your setup...V-Wire, Layer 3, Layer 2

[pulukas]

I assume you have already checked the physical.

Both side optics are the same mode (mulit or single)

Flipped the transmit/receive fibers on one side