11-25-2019 03:17 PM - edited 11-25-2019 03:18 PM
Do i need to enable aho and dfa or not ?
Running 8.1.9 on PA 5220
debug dataplane fpga state
aho offload not ready
dfa offload setup
Use software only
11-25-2019 07:13 PM
You are currently running defaults, which is what I would expect. Why are you looking at modifying the FPGA settings?
11-25-2019 07:13 PM
You are currently running defaults, which is what I would expect. Why are you looking at modifying the FPGA settings?
11-26-2019 10:02 AM
Was curious to know what they do?
12-03-2019 01:46 PM
Verify with PA that these are default settings and suppose to work better this way
11-30-2020 01:11 PM - edited 11-30-2020 01:12 PM
Doesn't this article imply otherwise?
https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000PLsbCAG
P.S. I have the same issue currently.
11-30-2020 04:42 PM
What issue are you actually trying to address? When your troubleshooting potential FPGA issues you can change Aho and dfa to use solely software, but by default the firewall is going to want to offload these to FPGA.
11-30-2020 04:46 PM
We had a problem with high latency on the data plane despite low apparent resource utilization. It appears to be resolved now though. Turns out it was related to QoS.
12-01-2020 09:48 AM
Thanks for updating us!
Regards
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
