Enhanced Security Measures in Place: To ensure a safer experience, we’ve implemented additional, temporary security measures for all users.
03-31-2022 05:49 PM
Hello Community,
I have two sites, I did an initial design, and I want to make sure that I won't find any problems in real installation*
on site 1 (topology1) We found a problem that the distance between ISP installation and IT room more than 200m So we wanted to use a media converter copper to fiber , Is this correct or could it cause a problem like loop?
on site 2 (topology2) The distance is close so every port from the router version Fios To two FWs PA-440
Are both designs correct? Or does need a switch Any suggestions or help please?
Thank you
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
