- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
Enhanced Security Measures in Place: To ensure a safer experience, we’ve implemented additional, temporary security measures for all users.
02-19-2019 02:54 AM - edited 02-19-2019 02:55 AM
Hi All,
I setup PN VM 7.1.0, my vmworkstation is pro 12.5.2. I b
VMnet11 bridge my wire network card.
I set 192.168.200.98 for the management interface of the PA VM
Next I set IP, zone and default gateway for ethernet 1/1
Afther that, I am having problems. The default gateway can ping the IP of ethernet 1/1 of the PA VM
ping 10.12.172.230
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.12.172.230, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/6/10 ms
But the PA VM can't ping the gateway and any Interent IP.
admin@PA-VM> ping host 10.12.172.1
PING 10.12.172.1 (10.12.172.1) 56(84) bytes of data.
From 192.168.200.98 icmp_seq=1 Destination Host Unreachable
From 192.168.200.98 icmp_seq=2 Destination Host Unreachable
From 192.168.200.98 icmp_seq=3 Destination Host Unreachable
admin@PA-VM> ping host 8.8.8.8
PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.
From 192.168.200.98 icmp_seq=1 Destination Host Unreachable
From 192.168.200.98 icmp_seq=2 Destination Host Unreachable
From 192.168.200.98 icmp_seq=3 Destination Host Unreachable
From 192.168.200.98 icmp_seq=5 Destination Host Unreachable
It looks like that all network traffic go to management interface. Could anyone tell me how I can resolve?
Thanks in advance!
02-19-2019 09:58 AM
Hello,
Also it seems that your Management interface doesnt have a gateway IP set. So either you need to populate one or change the default Service Route Config since it sources all updates/etc. from the Management interface.
Regards,
02-19-2019 03:14 AM
If you send out a ping using the >ping host x.x.x.x command, you are actually sending out the ping from the management interface.
If you want to send out a ping from the dataplane interface, you need to set the source IP
>ping source 10.12.172.230 host x.x.x.x
02-19-2019 09:58 AM
Hello,
Also it seems that your Management interface doesnt have a gateway IP set. So either you need to populate one or change the default Service Route Config since it sources all updates/etc. from the Management interface.
Regards,
02-20-2019 05:00 PM
Thank you. Now it works. Appriciate your reply.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!