PA8.1 RIP Question


Changes to the LIVEcommunity experience are coming soon... Here's what you need to know.

L0 Member

PA8.1 RIP Question



I have a linknet with 2 routers exchanging RIP information. I want to add a PA3020 to this linknet and I want it to learn all the RIP routes. However I do not want it to advertise anything. What is the default behavior of RIP in PA, will it advertise all connected, static, etc by default?



Cyber Elite


While i do not use RIP, I checked my virtual routers and looks like there is an option to enable advertisements. So as long as it is not checked, it should be in listen\learn only mode. But I could be wrong since I havent worked with RIP in a very long time.




You could also reach out to your SE for configuration assistance. Most SE's will help out.





Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!