05-19-2017 12:40 PM
I have a problem once in a while where packet capture filters are not working. I set up the filters at one point and if I delete the filters and set up a new filter. Turn packet capture back on and it still gives me captures of the old filter. I can not figure out how to either clear out the filters or clear out the packet capture files.
Anybody see this before?
Thanks,
Steve
05-19-2017 12:51 PM - edited 05-19-2017 12:53 PM
Packet filters will tag sessions to capture.
If you change filters then active sessions keep the tag and are still captured although filter is different.
> debug dataplane packet-diag clear filter-marked-session all
05-19-2017 12:54 PM
Nice. Never had this before but good to know
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
