Palo Alto Bandwidth limiting bandwidth for certain subnets?

Reply
Highlighted
L2 Linker

Palo Alto Bandwidth limiting bandwidth for certain subnets?

i have a PA-220 , can i limit bandwidth for certain subnets , for example limit a guest subnet for 10 mbps while let other subnet take 20 mbps? if so how do i do that?

Tags (2)

Accepted Solutions
Highlighted
L0 Member

Re: Palo Alto Bandwidth limiting bandwidth for certain subnets?

Absolutely, There's a few way to do this. I'm going to post some links with more info below for you to check out. One way, In the QoS profile, you can set an egress max limit for a certain class. Through a QoS Policy, you can assign the guest traffic to that class. Then the Qos Profile will be applied to the egress interface (internet interface). 

https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000ClS0CAK

https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000ClFjCAK

https://docs.paloaltonetworks.com/pan-os/8-1/pan-os-admin/quality-of-service/qos-concepts

PCNSE

View solution in original post

Tags (1)

All Replies
Highlighted
L0 Member

Re: Palo Alto Bandwidth limiting bandwidth for certain subnets?

Absolutely, There's a few way to do this. I'm going to post some links with more info below for you to check out. One way, In the QoS profile, you can set an egress max limit for a certain class. Through a QoS Policy, you can assign the guest traffic to that class. Then the Qos Profile will be applied to the egress interface (internet interface). 

https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000ClS0CAK

https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000ClFjCAK

https://docs.paloaltonetworks.com/pan-os/8-1/pan-os-admin/quality-of-service/qos-concepts

PCNSE

View solution in original post

Tags (1)
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the Live Community as a whole!

The Live Community thanks you for your participation!