06-13-2011 08:07 AM
Hi All,
It has been sometime that i haven't touch on Palo Alto device and i want to clarify whether can i configure as access port (or called as untagged port) other than normally create L3 vlan routing?
I don't see such settings available on the configuration.
06-13-2011 12:22 PM
Yes, you can configure an interface in L2 mode without vlan tagging (access mode). Configure as L2 interface type and specify a vlan on the ethernet interface itself. Then assign the interface to a zone. That should be it. Do NOT configure a unit for the interface which would require tagging (trunk mode).
-Richard
06-13-2011 12:22 PM
Yes, you can configure an interface in L2 mode without vlan tagging (access mode). Configure as L2 interface type and specify a vlan on the ethernet interface itself. Then assign the interface to a zone. That should be it. Do NOT configure a unit for the interface which would require tagging (trunk mode).
-Richard
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
