Palo Alto firewall interface not coming up is going though gigamon

Showing results for 
Show  only  | Search instead for 
Did you mean: 

Palo Alto firewall interface not coming up is going though gigamon

L1 Bithead

During the firewall migragration our Palo Alto link did not come up.

When we check it is going though gigamon and not coming up ...not sure what to do for that ..need help/guidance ....


L4 Transporter

Hi Rohan,


To start with, you may want to rule out any L1 issues, you may check by changing the cables to see if the interface LED blinks.

If the LED remains off even with a known good cable,please contact Technical support to validate any hardware issues and issue a replacement if required.


Hope this helps !

Thank you for help ...


I will test it and let you know

  • 2 replies
  • 101 Subscriptions
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!