10-03-2013 01:45 AM
Guys,
we have a PAN agent User-ID version 5 running on the network, all is working fine, but just that
on the PAN agent User ID, I see only one device PA-FW as connected.
The active one, and the standby does not show up.
Is this the right observation, or should I see both the PA-FW's on the PAN Agent.
Active and standby.
Please advise.
Regards,
Tau_
10-03-2013 03:23 AM
yes User-ID-Agent status on passive HA shows not-conn:idle.
Is this why it does not show the second HA on the user id.
So in case we fail, it should show the other PA-FW right.
10-03-2013 03:27 AM
yes that is why it does not show the second HA on the user id
if failover happens it will show.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
