PAN-OS SDWAN tunnel failover
cancel
Showing results for 
Search instead for 
Did you mean: 

PAN-OS SDWAN tunnel failover

L1 Bithead

Hi All,

 

  I have recently setup a SD-WAN between 2 PA firewalls. a default route was created automatically to sdwan.1. Though when one of the interface failed, it is not able to failover to the remaining tunnel which mapped to sdwan.2. May I know if I need to manually create a route for sdwan.2 though I could not find the interface under the static route setting (p.s I am using static route in my testing environment)

 

Thanks

Best Regards,

Elroy

3 REPLIES 3

L1 Bithead

It seems to me that some of the parameter has been created wrongly by auto vpn. A backup physical interface has been attached to sdwan.902 instead of 901. And there is no zone configuration for two tunnels on hub firewall. I have attached the screenshots here. Could anyone kindly suggest what could be done to resolve the issue? Thank youImage 46.jpgImage 48.jpg

Hi,

I would firstly force the template value. Those tunnel interfaces should have zone-internal attached to them. 

If that does not work, create a layer 3 zone and make a dummy change on panorama and commit to the firewall. 

Hi,

 

  I do use panorama to do the config and tried to force template value already. Can you share what config to be changed on panorama as I cannot override the setting on the firewall itself and somehow the interface seems to be attached to the wrong tunnel as the screenshot shown

 

thanks

regards

Elroy

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!