Panorama 5.1.0 upgrade fails and VM cannot boot on VMware

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

Panorama 5.1.0 upgrade fails and VM cannot boot on VMware

Not applicable

Hi,

I have upgraded my Panorama residing on VMware using the web interface to 5.1.0 but it is not able boot now.

It is on VMware and it is continuously asking for a login with different names and after a while it reboots.

Any ideas?

4 REPLIES 4

L6 Presenter

I had the same issue.I downloaded 5.1.0 image and installed a clean Panorama to fix that.

I've got lots of settings and logs... I think I'll be losing them?

you better open a case for this.

Having noticed the changes I have implemented the SCSI adapter and 64-bit change but the bootloader freezes and is not responsive.

  • 2428 Views
  • 4 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!