panorama and user-id agent connections

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements
Please sign in to see details of an important advisory in our Customer Advisories area.

panorama and user-id agent connections

L4 Transporter

Hi

 

I have a A/P clusert and I have panorama talking to it and also other PA's to distribute userid info.

 

Now I have agent configured from panorama to each of the management ports on the A/P cluster.

 

But 1 is always failing - as its the passive one,

 

I was thinking i should actually attach userid agent to a lo back device and have only 1 agent configured from panorama to that address.  

 

any thoughts ??

1 accepted solution

Accepted Solutions

L3 Networker

Yes, create a DP interface that will fail over the IP between A/P, and attach a management interface profile that allows User-ID to that interface. Configure the single IP in Panorama as a User-ID agent. 

 

 

View solution in original post

1 REPLY 1

L3 Networker

Yes, create a DP interface that will fail over the IP between A/P, and attach a management interface profile that allows User-ID to that interface. Configure the single IP in Panorama as a User-ID agent. 

 

 

  • 1 accepted solution
  • 1850 Views
  • 1 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!