PBF for incoming connections

cancel
Showing results for 
Search instead for 
Did you mean: 

PBF for incoming connections

L1 Bithead

NAT translation goes like this:

Destination NAT and Security Policy:

https://docs.paloaltonetworks.com/pan-os/8-1/pan-os-admin/networking/nat/nat-configuration-examples/...

Policy Based Forwarding:

Polices > Policy Based Forwarding >

Under General Tab > Name "Incoming"

Under Source Tab > Zone "Outside-Zone"

Under Destination/Application/Service Tab > Destination "Private_IP"

Under Forwarding tab>

Action - Forward

Egress Interface - The interface where the server is located

Next Hop - IP address

If directly connected the same IP if not next routing device

Check mark Symmetric Return

This did it for us and we got it working for incoming connections through the second ISP without a default route.

1 ACCEPTED SOLUTION

Accepted Solutions

Cyber Elite
Cyber Elite

Good Info.  Thank you for sharing.

Help the community: Like helpful comments and mark solutions

View solution in original post

1 REPLY 1

Cyber Elite
Cyber Elite

Good Info.  Thank you for sharing.

Help the community: Like helpful comments and mark solutions

View solution in original post

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!