- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
05-02-2019 12:07 PM
i am able to establish tunnel with vendor
can ping the vendor lan ip
but ikemgr shows
2019-05-02 13:01:54.000 -0600 [PWRN]: { : 94}: phase-2 sa purge mismatch SPI:0x00000000/0x07A04C1A.
05-03-2019 10:46 AM
Hello,
If the tunnel is up then and passing traffic its good? Not sure on the error, you might want to open a support case on it.
Regards,
05-03-2019 10:56 AM
now we are getting this error
tunel comes up both phase 1 and 2 are green
status on cli shows active
( description contains 'IKE phase-2 negotiation is failed as initiator, quick mode. Failed SA: x.x.x[500]-x.x.xx[500] message id:0xFF762365. Due to negotiation timeout.' )
05-03-2019 12:10 PM
also system log shows
( description contains 'IKE protocol notification message received: INITIAL-CONTACT (24578).' )
04-22-2021 11:31 PM
@MP18, Just wanted to check if this issue is resolved? All of sudden we have started facing similar issues on few tunnels. Thanks
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!