Planning virtual deployment into cluster

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements
Please sign in to see details of an important advisory in our Customer Advisories area.

Planning virtual deployment into cluster

L1 Bithead

I have a Hyper-V cluster that spans 4 hosts that I want to protect with a pair of PA VMs.

 

My question is do I need a pair of PAs for each host or do I add these two into my existing cluster and make the trusted interface on my existing vswitch and untrusted interface the physical vmlan interface used by my hypervisors?

 

If anyone has deployed a PA-VM for this type of situation and can offer any advice that would be great.

 

Thanks!

1 accepted solution

Accepted Solutions

L1 Bithead
1 REPLY 1

L1 Bithead

All good, I've found this article which has what I am looking for.

 

https://www.paloaltonetworks.com/documentation/80/virtualization/virtualization/set-up-the-vm-series...

  • 1 accepted solution
  • 2199 Views
  • 1 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!