03-07-2018 02:19 AM - edited 03-07-2018 02:20 AM
Just posting today to request confirmation on which ports are required to allow Radius communication for authentication (only), between Panorama and Cisco ISE.
Panorama ------------------- FWs--------------------Cisco ISE
Which ports to open up on FW sitting in the middle?, I'm reading UDP 1812 though there's a part of me which suspects there could be others.
Thank you
03-07-2018 06:44 AM
Strictly from radius point of view these are the ports that it would use by default on an ISE appliance.
UDP: 1645,1812 for Radius Authentication
UDP: 1646,1813 for Radius Accounting
UDP: 1700,3799 for Radius CoA.
03-07-2018 06:44 AM
Strictly from radius point of view these are the ports that it would use by default on an ISE appliance.
UDP: 1645,1812 for Radius Authentication
UDP: 1646,1813 for Radius Accounting
UDP: 1700,3799 for Radius CoA.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
