Enhanced Security Measures in Place: To ensure a safer experience, we’ve implemented additional, temporary security measures for all users.
07-31-2022 06:04 PM
I have followed below link to configure a QoS setting for testing purpose.
Configure QoS (paloaltonetworks.com)
I have specify only 1 ip 192.168.1.x /32 in QoS profile and also tried to specify in the interface clear text traffic.
In the result the QoS not only apply in only the IP that I specify but it apply all traffic going out through that interface. According to the guide it should only apply in the IP that I have specify. Any limitation in PAN-OS 8.1.20 ?
08-04-2022 03:03 AM
8.1 is end of life so may want to consider an upgrade
for your QoS profile, create a class different than 4 (like 8 for example) and then create a QoS rule that only uses that IP as source or destination and classifies it as class 8
08-04-2022 03:03 AM
8.1 is end of life so may want to consider an upgrade
for your QoS profile, create a class different than 4 (like 8 for example) and then create a QoS rule that only uses that IP as source or destination and classifies it as class 8
08-04-2022 06:32 PM
Thanks for reply, I would try it first. Currently my QoS profile only configure 1 class and using class 1 .
On my QoS rule only 1 ip/32 destination is any with specific ports.
08-16-2022 01:39 AM
Its working after classify as class 8
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
