Enhanced Security Measures in Place:   To ensure a safer experience, we’ve implemented additional, temporary security measures for all users.

Qos on application and class 1 and 4

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

Qos on application and class 1 and 4

Cyber Elite
Cyber Elite

I have created qos policy for application http-video and is defined in class 1

 

However when i run below commands

show session all filter application http-video qos-class 1

 

show session all filter application http-video qos-classs 4

 

I see the application http-video on both?

 

need to know why i see the application http video in the class 4?

 

MP

Help the community: Like helpful comments and mark solutions.
1 accepted solution

Accepted Solutions

L7 Applicator

This could be one of the following:

  • Your QoS rule does not catch all http-video traffic (depending on how you created it (source/destination IP/zone...))
  • It is a long living http-video session that existed already before you created the QoS rule

View solution in original post

3 REPLIES 3

L7 Applicator

This could be one of the following:

  • Your QoS rule does not catch all http-video traffic (depending on how you created it (source/destination IP/zone...))
  • It is a long living http-video session that existed already before you created the QoS rule

my qos rule covers all the source and deatination as it covers any any but under category i have two content delivery network

and business and ecomony

 

will check session date and time now

MP

Help the community: Like helpful comments and mark solutions.

seems application was hitting the url category computer-and-internet-info which has non qos rule.

MP

Help the community: Like helpful comments and mark solutions.
  • 1 accepted solution
  • 2404 Views
  • 3 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!