02-24-2011 03:05 PM
I had to reset to factory, now I am prompted for a (PA-HDF Login), I have tried the normal admin/admin but it does not work. Any suggestions?
02-24-2011 03:08 PM
After a reboot the firewall will have to boot up and then complete an auto-commit. Possibly your firewall is still performing the auto-commit.
If your firewall doesn't come up then you may have a failure that requires assistance from Tech Support.
-Benjamin
03-02-2011 12:17 PM
Wait for the appropriate prompt...
admin@PA-500>
admin@PA-2050>
Then try to login. If you are not seeing a prompt like the two shown, your Factory reset is still processing.
Steve Krall
08-09-2011 03:27 AM
After doing a "reset to factory".
I first got a message:
Peregring login:RPC:Fragment too large 0x61c04a15
And then after some minutes the pa500 rebooted.
Now I only got pa-hpd:login prompt....
We are "out of business" here...
Runnin OS 3.1.7
EDIT: It took about 20 minutes before normal login apeared.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
