Enhanced Security Measures in Place: To ensure a safer experience, we’ve implemented additional, temporary security measures for all users.
07-07-2017 07:14 AM - edited 07-07-2017 07:24 AM
HI ,
I would like to Use one Public IP for Static NAT, but the Same Public IP is used in our Dynamic NAT pool with Dynamic ports,
my question is, if i place my Static NAT, whether the Same Public IP will use in Dynamic NAT Too?
07-07-2017 07:25 AM
Honestly I've never done it so I'm not sure if it would work. I would recommend that you don't try though. It's easy enough to take an IP out of a dynamic NAT pool and assigning it to a static NAT.
07-10-2017 01:39 AM
It's perfectly possible to do this, you just need to be mindful of your 'oversubscription'
under most circumstances this should not be problematic at all, check out the Getting Started: Network Address Translation (NAT)
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
