Showing results for 
Show  only  | Search instead for 
Did you mean: 


L1 Bithead

Trying to setup a LTE link as a backup link for an SDWAN deployment.  All of the LTE gateway devices do PAT as they get a single IP from the provider.  Will this work.  Don't think it will work in the hub but in the branches believe it will.  Just want to make sure since there is no specific documentation around this or any configuration objects to call out the PAT.


Cyber Elite
Cyber Elite


This will work perfectly fine in the branches. 

Going to test this out hopefully over the weekend.  Will get the LTE gateway setup and the interface on the PA-220s.  Going to use the LTE interface settings and a top down path selection so that the cable modem is first and only if it drops does LTE come online.  

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!