Select PAN-OS version after reboot

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Select PAN-OS version after reboot

L5 Sessionator

In HA upgrade scenario we decided to stop the procedure and downgrade after the 1st FW was upgraded and had issue. But on the 2nd FW software install was already completed but we didn't reboot the FW so it stayed on old version.

 

Does anyone know the CLI commands to show into which version the FW will boot? And how to select to boot to old version?

1 ACCEPTED SOLUTION

Accepted Solutions

Found it! You just need to re-install the desired version it seems.

 

https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000boLJCAY

 

 

View solution in original post

5 REPLIES 5

L5 Sessionator

Current status is:

Partition State Version
--------------------------------------------------------------------------------
sysroot0 PENDING-CHANGE 10.1.5-h1
sysroot1 RUNNING-ACTIVE 10.1.4
maint READY 10.1.5-h1

 

I want to cancel pending change to 10.1.5-h1 after reboot

Cyber Elite
Cyber Elite

Hello,

Since you already installed the new version, I think you have to reboot, then downgrade, reboot again? Might want to call TAC on this?

Regards,

L5 Sessionator

I vaguely remember once having a similar issue and that I found KB article which provided solution. Of course I didn't write down the commands anywhere and now I can't find that KB article again 🙂 

With 1st level support i would spend weeks before making any progress if at all.

Found it! You just need to re-install the desired version it seems.

 

https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000boLJCAY

 

 

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!