06-03-2021 06:33 AM
Hello,
We have PA-220 devices that are configured with DHCP interface for Internet access. We need to change the service route config for all update-related trafic (URL, dynamic contents, EDL, ...) since default mgmt interface has no Internet access.
However I cannot chose the corresponding interface from the drop-down list. Indeed, the only selectable interfaces are the ones with static IP configuration.
Is this a bug or do I missed something ?
We are running Pan-OS 8.1.19
Regards,
06-03-2021 07:18 AM
Only static ip addresses can be used for service routes. if you need to use a dynamic ip interface for updates etc. you will need to configure a loopback interface and then point the required services to that loopback address,,,
some help here...
https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000Clp3CAC
06-03-2021 07:18 AM
Only static ip addresses can be used for service routes. if you need to use a dynamic ip interface for updates etc. you will need to configure a loopback interface and then point the required services to that loopback address,,,
some help here...
https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000Clp3CAC
06-04-2021 12:13 AM
Hello,
Many thanks for your answer. I was never facing that issue before (I think I always had to deal with static IP addresses), and I didn't know this KB.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
