08-04-2016 06:42 AM
I ran across this setting this morning- when setting up a NAT rule, you can specify a service or service group. Cool, but is there a reason to do that when a policy is necessary to open a service port?
08-04-2016 07:07 AM
This is for the destination services/port numbers. So you want to apply this NAT sure let's say for the destination service HTTP or HTTPS only then you need to specify it in the service TAB
08-04-2016 07:09 AM
The service port will mostly come in handy if you have a single external IP address and several internal servers running different services, you can use PAT to direct all connections to the same destination IP but with different destination ports, to all different translated destination servers
08-04-2016 12:13 PM - edited 08-04-2016 12:16 PM
This is pretty much like a port forwarding but in PA you do this though the combination of the NAT rules and security policies
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
