04-20-2017 02:08 PM
I've already read the articles in the live community for starters. Never setup a branch office before. This new branch office has 2 isp's and 1 VPN tunnel from there to HQ. I have the firewall completely configured already for using 1 ISP and the 1 VPN tunnel. Cannot follow the articles that exist on this subject. There are too many assumptions and holes in there that I get lost in.
Does anyone know of some better documentation?
04-20-2017 09:10 PM
Do you have 1 fast ISP and other slow as backup or you want to load balance?
If you have failover configuration then point PBF towards main fast ISP and set Monitor Profile to "Fail Over".
In this case if main link goes down then PBF will fall back to standard routing table and default gateway in virtual router will point to backup ISP gateway.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
