I'm almost done with a Cisco ASA to Palo Alto site to site VPN migration project.
What I am having an issue with is once a tunnel is built, traffic from the remote side is coming out of the tunnel, hidden behind the remote peer, a typical hide-nat.
Peer IP = 188.8.131.52
ProxyID (remote) = 184.108.40.206
How do I get this to work in PanOS? It works flawlessly on the ASA, which to be fair, is like comparing an Yugo to a Cadillac.
So you're getting the tunnel to form properly and the tunnel is showing up and online? If that's the case the fact that the other end is behind a NAT doesn't really have any relevance on the PAN side. You'll simply see traffic coming from the one address for anything entering your network and you'll need to route on the PAN to point whatever ranges are needed back through the tunnel.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!