Enhanced Security Measures in Place: To ensure a safer experience, we’ve implemented additional, temporary security measures for all users.
08-22-2018 04:04 AM
I have downloaded the MIB's but cant find anything which would enable me to monitor the status of an IPSec tunnel.
Is it possible to monitor IPSec tunnel Up/Down via SNMP?
08-22-2018 05:26 AM
There are following traps but not sure if there is OID to monitor.
panVPNTunnelStatusDownTrap
panVPNTunnelStatusUpTrap
08-22-2018 06:26 AM
Hello,
What I do is make sure I apply an IP address to each tunnel interface. Then have a monitoring solution that monitors the far end of the tunnel so that if its unreachable, there is something wrong with the tunnel possibly. Using a SIEM is another method if you are parsing the logs.
Just some thoughts.
08-25-2018 02:48 PM
Not sure, but isn't the status of the tunnel interface always "up" even if the IPSec tunnel is down?
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
