Enhanced Security Measures in Place: To ensure a safer experience, we’ve implemented additional, temporary security measures for all users.
01-23-2012 12:35 PM
I'm probably overlooking something obvious.. but I can't seem to find a way to generate a login / session report of SSL-VPN users. Can anyone give a brother a hint?
01-23-2012 03:55 PM
There is no "report" about SSL-VPN users/usage.. not yet.
Inside 4.0, there was a way that you could get into the WebUI, Network -> SSL-VPN, and then click on the "User Info" field, and then see active current users, and then historical to a point.
I am sorry that we do not have anything like that in 4.1, as NetConnect has been replaced by Global Protect.
You might be able to gather similar information in 4.1 for Global Protect as you could above for SSL-VPN users in 4.0.
I hope this helps a little.
01-23-2012 03:55 PM
There is no "report" about SSL-VPN users/usage.. not yet.
Inside 4.0, there was a way that you could get into the WebUI, Network -> SSL-VPN, and then click on the "User Info" field, and then see active current users, and then historical to a point.
I am sorry that we do not have anything like that in 4.1, as NetConnect has been replaced by Global Protect.
You might be able to gather similar information in 4.1 for Global Protect as you could above for SSL-VPN users in 4.0.
I hope this helps a little.
01-23-2012 04:02 PM
Haven't yet moved to 4.x. Still running 3.1.10 in production, but will be evaluating 4.1.1 in a smaller site because of existing issues with the NetConnect package that we're hoping Global Protect will resolve.
Thanks for the official word on that. It would be nice if this is added at some point, so we can audit who is using the client VPN. 
02-23-2012 06:43 AM
I created a work around where I email a report showing traffic on the VPN IP Range. The VPN users once connected use a unigue IP Range so I just run a traffic report. It is not ideal, but better than nothing
02-27-2012 01:27 PM
we use syslog which records username ip adress and time of connect / disconnect.. simple fast and efficient
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
