Static Route Path Monitoring Clarification

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements
Please sign in to see details of an important advisory in our Customer Advisories area.

Static Route Path Monitoring Clarification

L0 Member

Hi,

 

Let's say a scenario where I have a default route configured to go out interface 2 with a Metric of 10

 

Then I have another static route to go out interface 3 with metric of 5. On this route I setup path monitoring to ping an ip address that is accessible to both interface 2 and interface 3. Does the static route path monitoring ensure that its "ping" is only going over the interface that it is applied to (in this case interface 3)? Basically im pointing at the fact both interface can see the monitored IP and the monitor would always be up or at least it would go down and after the failover go back up (because of interface 2's ability to ping that IP). I assume it only goes over the interface the monitor is applied to but for sanity's sake I wanted to ask.

1 accepted solution

Accepted Solutions

Cyber Elite
Cyber Elite

Yes it goes from the interface where path monitoring is enabled. In your case, it will be interface 3. As whenever you configure path monitoring for any static route, you mention source IP/interface which belong to the interface on which the monitoring is getting applied.

 

If you want to monitor both the routes, you need to apply path monitoring separately on both routes.

 

Hope it helps you!

 

Mayur

M

View solution in original post

1 REPLY 1

Cyber Elite
Cyber Elite

Yes it goes from the interface where path monitoring is enabled. In your case, it will be interface 3. As whenever you configure path monitoring for any static route, you mention source IP/interface which belong to the interface on which the monitoring is getting applied.

 

If you want to monitor both the routes, you need to apply path monitoring separately on both routes.

 

Hope it helps you!

 

Mayur

M
  • 1 accepted solution
  • 2820 Views
  • 1 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!