- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
06-29-2018 01:56 AM
First post to this forum!
I have a PA-500 and 3 ISPs. 2 of the 3 VLANs are forwarded using PBF (VLANs 10 & 30 ) and the third uses the default route (VLAN 20).
My (simplified) configuration is as follows;
VLAN10 - PBF to ISP 1 fail-over to default if the monitor address is unreachable. <- This is working OK
VLAN 20 - No PBF, direct to the default route (ISP 2). <- This is working OK
VLAN 30 - PBF to ISP 2 wait recover and disable if unreachable
If ISP 2 goes down I want to prevent VLAN 30 from being routed to another ISP. I have created another PBF rule below this one to 'discard'. Is this the correct configuration to achieve this or is there another way this should be configured?
06-29-2018 02:51 AM - edited 06-29-2018 03:25 AM
Hi James ,
Create a PBF policy for VLAN 30 to route through ISP2 and monitor unchecked.
Regards,
Ram
06-29-2018 02:51 AM - edited 06-29-2018 03:25 AM
Hi James ,
Create a PBF policy for VLAN 30 to route through ISP2 and monitor unchecked.
Regards,
Ram
06-29-2018 03:28 AM
It really was that simple. Thank you!
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!