Hi - I may have not understood how this is achieved - so apologies before I start!
I'm trying to forward logs for traffic and threat to syslog We have 2x 4050s and Panorama - all policy rules are added via panorama.
I've created a "log forwarding profile" in Panorama that says - forward all traffic and threats to panorama. This is then added to each rule on Panorma. Both the log forwarding profile and the addition to the individual rules are pushed to both the firewalls fine and I get logs on the Panorama.
However, I now want to set the traffic logs to forward to syslog as well. I go into Panorama and under the Panorama tab--->Server profiles-----> syslog. I've created a syslog entry for my server. Still on Panorama I now go back to the "log forwardinng profile" I've already created and used and try and choose the syslog server I just created - it doesn't show on the drop down list.
NB - if I go onto the FW itself I can create a syslog server and then a log forwarding profile and choose the syslog server fine. I guess I could apply that to local rules for a full test - but I don't have any local rules only rule generated from Panorama (and of course the rules generated from Panorama can't be changed locally).
Am I missing something?
Thanks for your reply. I can forward system and config logs fine from the PA boxes (both syslog and forward to panorama). What I can't do is syslog traffic rules (ie rule logging). I can't do this from the PA box itself and the rules were created on Panorama (so are not editable on the PA box). I can't see a way of doinng it - but it must be possible - rules created on Panorama - having them log to syslog. Please help!!
The log forwarding and syslog profiles will need to be created in Panorama and then referenced in the Panorama pre/post-rule. This way all elements of the forwarding mechanism are managed inside Panorama.
In 4.0 you are able to reference the Panorama pushed log forwarding profile in a local device rule if needed. This way any change to the Panorama forwarding profile affects both shared pre/post-rules as well as the device rule.
Hi - thanks for your response. I understand what you're saying and it's what I have done. I've created the "log forwarder" and "syslog server" profiles in Panorama. However, the syslog server I've created in panorama doesn't display in the drop down list in the log forwarder I've created in Panorama. I can only use the syslog server I've created on Panorama for use in the "config" and "system" log settings - NOT the "log forwarder" - it just doesn't show up. I assume it's a bug?
It is a bug.
Once you've got the profile for the syslog server entered, do this from the CLI:
set panorama log-settings system critical send-syslog using-syslog-setting SYSLOG-PROFILE-NAME-GOES-HERE
set panorama log-settings system high send-syslog using-syslog-setting SYSLOG-PROFILE-NAME-GOES-HERE
set panorama log-settings system medium send-syslog using-syslog-setting SYSLOG-PROFILE-NAME-GOES-HERE
set panorama log-settings system low send-syslog using-syslog-setting SYSLOG-PROFILE-NAME-GOES-HERE
set panorama log-settings system informational send-syslog using-syslog-setting SYSLOG-PROFILE-NAME-GOES-HERE
Hi mstingley! Just realised that the CLI options you give aren't quite what I'm looking for. In 4.0.5 I can achieve what you needed to do in the CLI at 4.0.3. My issue is when editing the "Log Forwarding Profile" I can't reference the "syslog server profile" I've created. I can't see a way of doing this via the CLI either!
Anymore advice anyone?
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!