Tag Static Routes that are Redistributed by OSPF

cancel
Showing results for 
Search instead for 
Did you mean: 

Tag Static Routes that are Redistributed by OSPF

L1 Bithead

I need to tag static routes that are being redistributed by OSPF but I am getting confused on where the tag should be applied. Does the tag need to be applied in Virtual Router -> Redistribution Profile -> OSPF Filter -> Tag or does it need to be specified in the OSP Export Rules in Virtual Router -> OSPF -> Export Rules -> New Tag?

 

 

1 ACCEPTED SOLUTION

Accepted Solutions

L4 Transporter

In the redistribution profile, you are defining the source of the prefix (static) and the destination subnet. 

On OSPF-Export Rules, you will associate the redistribution profile and assign a type and a tag.

Or you can just add a subnet directly on the OSPF-Export Rules and include a type and tag. You don't have to use a redist profile.

View solution in original post

1 REPLY 1

L4 Transporter

In the redistribution profile, you are defining the source of the prefix (static) and the destination subnet. 

On OSPF-Export Rules, you will associate the redistribution profile and assign a type and a tag.

Or you can just add a subnet directly on the OSPF-Export Rules and include a type and tag. You don't have to use a redist profile.

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!