the show interface command
cancel
Showing results for 
Search instead for 
Did you mean: 

the show interface command

L2 Linker
Hello!

I have a question regarding the show interface command.

When you enter for example "show interface ethernet1/3" to see the information of that interface, you can eventually see counters for receive errors or drops. Are these errors counted from the last time data plane was restarted?

And is there an option similar to "filter delta yes" for physical interfaces, as a way to "reset" those errors? "show interface ethernet1/3 filter delta yes" doesn't seem to work...

Thanks in advance!
1 ACCEPTED SOLUTION

Accepted Solutions

L7 Applicator

According to documentation:

"These are the interface counters from the time the data-plane started on the firewall. These counters can be cleared with a data-plane restart only."

 

https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000ClWoCAK

Enterprise Architect @ Cloud Carib www.cloudcarib.com
ACE, PCNSE, PCNSI

View solution in original post

2 REPLIES 2

L7 Applicator

According to documentation:

"These are the interface counters from the time the data-plane started on the firewall. These counters can be cleared with a data-plane restart only."

 

https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000ClWoCAK

Enterprise Architect @ Cloud Carib www.cloudcarib.com
ACE, PCNSE, PCNSI

View solution in original post

Thanks for your answer, Raido, I suspected it but you've confirmed it.

 

 

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!