06-28-2012 08:00 AM
hi,
am unable to join the 2nd device to a cluster its new setup HA active/passive the error msg am getting is failed to push config: timeout
.
06-28-2012 11:39 AM
Is this a new setup?
If so you could try to factory reset both devices and start from there - so the first thing you setup is the HA.
Which hardware/model do you have?
06-28-2012 11:39 AM
Is this a new setup?
If so you could try to factory reset both devices and start from there - so the first thing you setup is the HA.
Which hardware/model do you have?
06-28-2012 01:00 PM
Did you configure two interfaces for HA ?
Set ip adress wich HA Member?
Best Regards.
06-28-2012 02:57 PM
*Please verify yiur configure against this Tech-note :
https://live.paloaltonetworks.com/docs/DOC-2926
*If the HA peers show a synchronized state Active -Passive :
Following documentshould take care of the error messge:
failed to push config: timeout
https://live.paloaltonetworks.com/docs/DOC-2177
Regards,
AK
07-01-2012 02:35 AM
reset both devices and am up and running thanks all for the kind support.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
