URL filtering profile - how to set "alert" to all categories?

[_slv_]

Hello

I'm looking for solution how to set "alert" for all actions for every categories in URL profile.
I believe that this is possible via CLI and I hope that someone could help me with that 🙂

Regards

Slawek

[santonic · Accepted solution]

get list of all categories in text format and use them in following commands:

set vsys vsysX profiles url-filtering 'profile_name' enable-container-page yes
set vsys vsysX profiles url-filtering 'profile_name'  log-container-page-only yes
set vsys vsysX profiles url-filtering 'profile_name'  alert [ questionable proxy-avoidance-and-anonymizers ]
set vsys vsysX profiles url-filtering 'profile_name' block [ malware phishing ]
set vsys vsysX profiles url-filtering 'profile_name'  action block

you can check your existing profiles with:

set cli config-output-format set

configure

show vsys vsysX profiles url-filtering 'profile_name'

[bmorris1]

Hi slv,

The easiest option would just be to click the set all actions option in the GUI:

hope this helps,

Ben

[_slv_]

Hi Ben

I know that I can do this by GUI but I'd like to learn CLI and this is good example how to do.

As I see on Your screenshot - there is 65 entries and You need to click twice or more for every category - so there is a lot of clicks ... and possible mistake. I prefer to do this in my quicker and safe option.

Santonic gave perfect set of command needed to finish this operation - THX

Regards

Slawek