use Palo as an NTP device

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

use Palo as an NTP device

Not applicable

Hi Guys,

      We have 2 * 2050's running 4.0.7 here and I was wondering if I could use these devices as NTP servers for other devices to sync against?  I've looked through the gui but can't see any way to do it so far.


Cheers

Chris

2 REPLIES 2

L6 Presenter

Not that im aware of.

However I think you could setup a DNAT rule to forward the NTP request made against some ip thats routed through the PA device (or ip which is already been used by the PA) into some NTP server of your choice.

For example if you only use RFC1918 addresses in your core you could address the ip of the PA device and with DNAT similar to:

srczone: inner

dstzone: inner

srcip: innerrange/cidr

dstip: PA_ip

service: udp123

translated dstzone: outer

translated dstip: NTP_ip_on_outer

along with a security rule that allows inner to reach outer for particular service like udp123 (and ip) and appid=ntp.

Thanks for the suggestion Mikand.

  • 2700 Views
  • 2 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!