- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
01-26-2012 01:12 AM
Hi Guys,
I was just wondering if you guys (PAN) could come up with a document on the installation guide for User-ID version 4.1.2. I did look up the knowledge base and found out various documents regarding Syslog, API and other stuff. But I am looking for more basic installation of the Agent on the Domain Controller ( User Identification, Setup and Discovery). It does look pretty straight forward, but I have always struggled when it comes to using the Setup tab on the User-ID agent.
Looking forward to hear from you guys.
Thank you
Kind Regards,
Kal
01-26-2012 10:39 AM
I have found 2 documents about User-ID (User Identification)
Install PAN User-ID:
https://live.paloaltonetworks.com/docs/DOC-1104
Configure PAN User-ID:
https://live.paloaltonetworks.com/docs/DOC-1112
I hope this addresses your inquiry.
Kind Regards,
02-02-2012 05:05 AM
That was not I as actually looking for. I have gone through them before posting this. I was more interested with the New User-ID agent configuration which is the only agent available under version 4.1.X.
I did finally figure out on configuring it after many attempts on customer sites. I will shortly document something on it and if possible share it out.
Regards,
04-06-2012 12:05 PM
Has a configuration guide been developed yet for UserID Agent v4.1.2 and later?
04-06-2012 12:23 PM
Here are some updated docs for the newer agent and 4.1.x software. Please let us know if this is what you were looking for.
4.1 Agent setup:
https://live.paloaltonetworks.com/docs/DOC-2132
4.1 User-ID Tech Note:
https://live.paloaltonetworks.com/docs/DOC-3120
Thanks,
Jason Seals
04-09-2012 05:53 AM
These documents you provided do not explain how to configure the User-ID agent after installation. I have the agent installed and running, but I have no instructions for configuring it to monitor the security logs, subnets, groups, etc.
06-19-2012 11:43 AM
I too am struggling with configuration after install. Is there a link to the updated guide?....and I dont need the guide User-ID Agent Initial Installation and Setup. Seems weird the only other document is User-ID Best Practices and trial and error.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!